HomeGeneral

Flashburn Discussion

Hex convertion problem for flash burn 

Gopal Sarkar
Gopal Sarkar
Posts: 1

12/1/2017
Hi

I am working on c6713 dsk and use flashburn 2.8/(also use v3 trial version) for hex file burn.
During conversion from .out to hex code by hex6x.exe through command prompt
it show some warning message and hex is not working after flash burn.
but .out file is working successfully through ccs3.3 tool.
below for warning messages -

--------------------------------------------------
Translating rtdx_matlabFFT.out to ASCII-Hex format...
"rtdx_matlabFFT.out" ==> .text
>> WARNING: section '.text' at 03000h falls in unconfigured memory (skipped)
"rtdx_matlabFFT.out" ==> .cinit
>> WARNING: section '.cinit' at 0ea28h falls in unconfigured memory (skipped)
"rtdx_matlabFFT.out" ==> .const
>> WARNING: section '.const' at 0f2b4h falls in unconfigured memory (skipped)
"rtdx_matlabFFT.out" ==> .switch
>> WARNING: section '.switch' at 0f568h falls in unconfigured memory (skipped)
and my link.cmd is --


MEMORY
{
vecs: o = 00000000h l = 00000200h
boot: o = 00000200h l = 00000200h
IRAM: o = 00000400h l = 0000FA00h
CE0: o = 80000000h l = 01000000h
}

SECTIONS
{
"vectors" > vecs
"bootload" > boot
.cinit > IRAM
.text > IRAM
.stack > IRAM
.bss > IRAM
.const > IRAM
.data > IRAM
.far > IRAM
.switch > IRAM
.sysmem > IRAM
.tables > IRAM
.cio > IRAM
}


and Flash_hex.cmd is

BlinkDSK6713.out /* Input File: COFF file format (.out) */
-a /* Output Format: ASCII Hex format (.hex) */
-image /* Select image mode */
-memwidth 8 /* Set memory width */
-o BlinkDSK6713.hex /* Output File: ASCII Hex file (.hex) */

ROMS
{
FLASH: org = 000h, len = 0x3000, romwidth = 8
}

---------------------------------------

kindly help me with proper cause and solution.

Regards

Gopal
0 link




Site Map

Copyright© 2013 - Software Design Solutions, Inc. All rights reserved.